How To Clean Metals Correctly

There’s a huge range of effective commercial metal cleaning products out there. Because it’s so important to have the right tools to hand when cleaning metal, we’d recommend the professional option over DIY solutions – although home remedies can yield reasonable results too.

Remember: Not all metals are quite as hard as you might expect, so it’s important to choose a cleaning method that does the job without scratching or corroding the finish. Test all new products and homemade cleaning solutions on a small, inconspicuous area before application, always consult the manufacturer’s instructions first, and take all of the required safety precautions. There are some great solutions for cleaning metal using common household products as well as cleaning products.

Stainless Steel & Chrome

  • For a proper clean of stainless steel, removing soap scum, food residue, grease and water marks, you’ll need a specialised stainless steel cleaning product. Something like Cif Stainless Steel is ideal. Most multipurpose bathroom cleaners will be able to give chrome a brilliant clean, although you can purchase specialised cleaners if you like.
  • Take a wet cloth and wipe down the entirety of the surface.
  • Apply your stainless steel or multipurpose cleaning product, following instructions on the label. Always apply cleaner to stainless steel by rubbing it in with the grain – follow the pattern along to avoid scratches or dullness.
  • Rinse off with water, and gently buff dry with a fresh cloth. Once again, go with the grain if you are cleaning steel.

Aluminium

  • Because baking soda is likely to spoil aluminium, it’s best avoided here. In fact, it is far safer in all cases to opt for simple soapy water, or a special aluminium cleaner. If you’d really prefer to try a homemade solution, mix and apply a solution containing white vinegar and cream of tartar for sparkling results.

Copper & Brass

  • There are commercial copper cleaners around, but other options may also yield results. Try applying ketchup gently with a cloth! Another trick is to halve a lemon and sprinkle it with coarse ground salt. Gently scrub the copper to restore its natural sheen. Rinse, and then rub gently with a soft cotton cloth.

Metal Cleaning Made Simple

  • Sometimes, just a good washing up detergent is all that’s needed to work wonders when cleaning metals – most notably stainless steel, which is used in appliances, pots, pans, grills, and utensils on account of its super tough construction. This routine clean is a simple way to keep metal clean and tarnish-free. Just use Persil Washing Up Liquid and hot water to wash metal pots and pans. Scrub them with a sponge, or soak them to help dislodge residue.

You won’t need to be calling in an industrial surface treatment solutions online or a cleaning solvent provider but you must always make sure you clean the metal in the right way for its properties. It’s important to remember that your equipment needs to be sterile too!


read more

What’s The Most Durable Flooring You Can Install?

You need durable flooring because you have children or dogs. Floor Contractors based in Kent can give you some great advice for this. Or maybe you just want a floor that will not scratch, gouge, and dent, requiring replacement every five years. Rated from best to worst, these floors are the most durable you can buy.

Bamboo

Summary: This grass, incredibly difficult to remove from your yard, looks surprisingly attractive when turned into flooring. If you have ever tried to hack bamboo out of your yard, you know how tough this grass can be. The secret to bamboo flooring’s sky-high durability ratings lies in three factors: stalk placement, added materials, and quality of bamboo.

Stalks/Construction: Most off-the-shelf bamboo flooring is made by laying the bamboo grass stalks cross-direction. Strand bamboo flooring is often called woven strand bamboo flooring for a good reason: strands of the bamboo stalks are pulled apart and more tightly integrated with the adhesives.

Adhesives: But the thing that truly makes a bamboo floor hard is the adhesive. Bamboo flooring is stuck together by man-made adhesives. More adhesives mean a tougher bamboo floor.

Bamboo Type: Unfortunately, this factor is difficult, if not impossible, to determine when shopping for bamboo floors. Better-quality, later-harvested bamboo is more durable than younger bamboo that is rushed to harvest.

Natural Stone

Summary: If stone weathered well in the mountains for thousands of years, it can weather your kitchen or bathroom. Travertine and other natural stones are neck-and-neck with concrete for durability, though some stones like marble can wear down faster than you might expect.

Resilient Flooring

Summary: Resilient flooring may be a term invented by flooring companies to market their product. But the term describes the product well. Also known as vinyl flooring this classic product is like Tupperware for your floors: 100% moisture resistant and laboratory-engineered to last for a very long time. Sheet vinyl is your best bet if pure resilience is your priority. In small rooms, you can skate by with just one seam or, if the room is small enough, no seams at all. Because seams are one factor that contributes to flooring deterioration, reduction of seams becomes an important point.

Plank resilient and tile resilient run a close second because of the seams.

Ceramic and Porcelain

Summary: Durable in some ways–but categorically not in other ways–tile wins out over other types of flooring because of its appearance.

Tile is durable against scratches and spills; tile lives for those kinds of emergencies. But drop a jar of pickles and it will undoubtedly crack. Balanced with tile’s sheer good looks and the creative “blank slate” that it offers, most homeowners are happy to take the chance of the occasional dropped jar or small appliance.

Also, good installation helps. An improper sub-floor or voids remaining below tiles contribute to cracking. Poorly grouted tile, too, will introduce moisture below the tiles, swelling sub-floor systems and creating a kind of “frost heave” that cracks the tile.


read more

Installing Kitchen Cabinets

Before you start to install your kitchens in berkshire, you should have removed the old kitchen, rerouted any utilities, and have the option to replace or finish the floor, if that is your plan. Always check that the entire cabinet order has arrived and is undamaged. Make sure that every item, right down to the screws, is checked off, because waiting for a second delivery can hold up the entire installation process. Installing kitchens in Hertfordshire is a job for at least two people, especially when it comes to hanging large wall cabinets.

Take time to prepare the wall surfaces and assemble the kitchen cabinets before installing them. Drawing the first guide line for positioning cabinets is essential to the success of the whole project. Cabinets and countertops are heavy items, and you will need someone to help you lift them into position.

Laying Out Cabinets

  • The starting point for installing any kitchen is a level guide line for the top of the base cabinets. A height of about 34-1/2″ above the floor is standard. The countertop is added later.
  • Start in one corner, using a level to guide you. Older floors can be uneven, so check the line’s height at intervals to make sure base cabinets and appliances will fit beneath it comfortably along the entire length.
  • Mark a second line to show the thickness of the countertop. Generally, wall cabinets are installed so that they are 19-1/2″ from the top of the countertop, but adjust this height according to the manufacturer’s specifications for positioning cabinets around the stove.
  • If you are attaching wall cabinets to a stud wall, you will need to use a stud finder so you attach cabinets to studs, or provide additional support with extra blocking to ensure that fasteners are solid.

Preparing the Cabinets

  • Once you have marked up the wall surfaces, you should assemble the cabinets. Follow the manufacturer’s instructions for each type of cabinet.
  • Wall cabinets sometimes have installation rails across their backs that you cannot see once the cabinet is held up to the wall. Note their size and position so you can drill pilot holes directly through the inside of the cabinet once you have positioned it.

Installing the Cabinets

  • Provided you have measured and marked accurately, installing the kitchen itself should be relatively straightforward. Follow your layout marks and attach cabinets to studs with screws. Predrill pilot holes and countersink screws beneath the surface. It may be easier to install upper cabinets first.
  • If you have a block wall, you can screw the cabinets directly to the wall with brackets. Drill and plug pilot holes in a masonry wall. It may be necessary to cut holes or notch cabinets to accommodate utilities. Wall cabinets will need to be positioned carefully, again, ensuring that they are securely screwed to the wall surface.

read more

The Many Ways that You can Repurpose Pallets

If you have recently gotten hold of a number of pallets and is pondering the thought of possibly getting them up-cycled into something useful for your home, you will certainly want to make sure that you explore several ideas. You want to make the most out of these fixtures from www.premierpallet.co.uk and you need to be sure to that these ideas are going to be feasible enough for you to do on your own.

A good way to use pallets from www.premierpallet.co.uk would be as vertical planters. The manner in which they are made and constructed makes them really ideal as vertical planters. If you happen to have a passion for growing green things, this could be an idea that you will want to pursue. There are a lot of DIY institutions that can be found on the web that will detail the step by step process that you need to do to get the planter up and ready.

It can be used as a room divider too. If you are fond of those rustic looks for your home, pallets can be made as attractive room dividers. You will need to get the right measurement for the room though so you can decide how many of these pallets you are going to need. Pallets are versatile too so you can easily employ different divider styles when using it.

They can be used as show racks too. If you have been having a constant problem with having way too many shoes in your home and not having an enough space where you can put them pallets can be repurposed as a shoe rack. They would be the perfect addition to your entryway and the fact that they are made from wood makes for an even bigger bonus point.

They can be made into furniture. One good idea would be to use them as an end table. You can take them apart and then reassemble the planks together to create a very nice, rustic-looking, lovely end table. They would be the perfect addition to the outdoor fixtures that you can place in the garden or on the patio.

Of course, you can make them into chairs too. These are fixtures that can both be made as indoor or outdoor chairs. They can be piled up to create the kind of style that you want. Adding a cushion on the finished product will even make them look extra fancy.

They are good to be sued as organizers as well. If you are tired of having a garden shed where everything is just way too hard to find, use a pallet to keep everything organized. Pallets have this compartmentalized style on them which make is very idea for them to be used as an organizing tool.

With all these ideas that you can use when it comes to repurposing pallets, do remember to always use only the right ones. If you are going for those used fixtures, make sure that they are safe and they are heat treated. Do a visual inspection and avoid those that seem to have spills and stains on them. If you can, and if you are willing to spend a little more, it would be better to just go for brand new ones.


read more

Pinless or Pin-type moisture meters?

Wood moisture meters can be extremely useful for people in many different professionals. With these kinds of devices, it becomes really easy to accurately and quickly check the water content in a piece of wood. In general, you are able to purchase two distinct types of moisture meters for wood. And depending on your needs for a moisture meter, the type that you should buy will also vary. You have got to assess your own needs and preferences in a moisture meter before you actually go and purchase one. It is extremely critical that you are aware of which type of moisture meter would be the best for you. This is because the way that each type of moisture meter will work will vary depending on its type. If you are not aware of the differences between a pinless and pin-type moisture meter, you can use this guide. It would help you out a lot, especially if you are confused as to the differences between each type of moisture meter.

Pin-type moisture meters

Like the name of this type of moisture meter suggests, you would use a pair of two thin pins inserted into the wood to check the moisture content of a piece of wood. The use of this kind of moisture meter is for anyone that wants to check the gradient moisture levels of wood. Thus, a pin-type moisture meter can actually check the difference in moisture content level between the surface and the core of the wood. You have to be aware though, that this kind of moisture meter can actually live two thin pin holes in the wood that you are checking.

Pinless-type moisture meters

The main advantage that this type of moisture meter has, is that it does not leave pin holes on the wood that you are checking. Instead of using a small pin that is inserted in a piece of wood, it uses magnetic fields to detect the amount of moisture in the wood. The use of this device is good because it can give the fastest results because moisture scans can be completed in only a few seconds. It would also give a 3-D field measurement of the moisture that is in a piece of wood. However, it would only check the surface level of moisture and not the core moisture content of the wood.

Those are all of the major differences that you can find a pin and pinless-type moisture meters. You have got to be careful about which one that you are going to choose, as it could become really difficult for you if you end up purchasing the wrong type of moisture meter. You may actually also end up purchasing the right type of moisture meter, if you learn all about the differences between the two types, through this article. The information that you can read here, could help you out a lot in purchasing a new moisture meter. You would also be able to find some great quality moisture meters through this website. Go to www.kilnservices.co.uk, if you are looking for well-made moisture meters that can accurately give you measurements on wood water content.


read more